Hazard Statements

Precautionary Statements

Section 6 Spill or Leak Procedures Steps to Take in Case Material Is Released or Spilled: Exposure to the spilled material may be irritating or harmful. Follow personal protective equipment recommendations found in Section 8 of this SDS. Additional precautions may be necessary based on special circumstances created by the spill including; the material spilled, the quantity of the spill, the area in which the spill occurred. Also consider the expertise of employees in the area responding to the spill. Avoid the generation of dusts during clean-up. Prevent the spread of any spill to minimize harm to human health and the environment if safe to do so. Wear complete and proper personal protective equipment following the recommendation of Section 8 at a minimum. Dike with suitable absorbent material like granulated clay. Gather and store in a sealed container pending a waste disposal evaluation. Section 7 Handling and Storage Handling: Wash thoroughly after handling. Do not breathe dust. Readily absorbs moisture from air. Storage: Keep container tightly closed in a cool, well-ventilated place. Keep in air-tight containers- material is hygroscopic. Storage Code: Green - general chemical storage Section 8 Protection Information ACGIH OSHA PEL Chemical Name (TWA) (STEL) (TWA) (STEL) Sodium Acetate N/A N/A N/A N/A Control Parameters Engineering Measures: No exposure limits exist for the constituents of this product. General room ventilation might be required to maintain operator comfort under normal conditions of use. Personal Protective Equipment (PPE): Lab coat, apron, eye wash, safety shower. Respiratory Protection: No respiratory protection required under normal conditions of use. Respirator Type(s): None required where adequate ventilation is provided. If airborne concentrations are above the applicable exposure limits, use NIOSH/MSHA approved respiratory protection. Eye Protection: Wear chemical splash goggles when handling this product. Have an eye wash station available. Skin Protection: Avoid skin contact by wearing chemically resistant gloves, an apron and other protective equipment depending upon conditions of use. Inspect gloves for chemical break-through and replace at regular intervals. Clean protective equipment regularly. Wash hands and other exposed areas with mild soap and water before eating, drinking, and when leaving work. Gloves: No information available